Fluke High Current Clamps

SKU: FLUKE I3000S FLEX_24 Categories: ,

The Fluke High Current Clamps are designed to extend the capabilities of your tester. With them you can use your multimeter as a Amp meter without the need for separate Clamp Tester. Measure currents of up to 6000 A.

482.00796.00

Clear

Description

i3000s
flex-24
i3000s flex-36
i3000s i6000
flex-24
i6000 flex-36
Nominal
Current Range
30 A
300 A
3000 A
AC rms
30 A
300 A
3000 A
60 A
600 A
6000 A AC rms
Continuous
AC Current Range
1 A – 30 A
2 A – 300 A AC rms
30 A – 3000 A
1 A – 30 A
1 A – 300 A
1 A – 3000 A
50 mV/A
5mV/A
0.5mV/A
Highest
Current
3500 A AC rms 4000 A 6000 A
Lowest
Measurable Current
1 A 1 A 1 A
Basic
Accuracy (48-65 Hz)*
± 1 % of range (45 Hz
to 65 Hz)
2% + 2 A (48-65 Hz) ±1% of range (45 – 65
Hz)
Usable
Frequency
10 Hz to 50 kHz (-3 dB) 10 Hz – 100 kHz 10 Hz to 50 kHz (- 3
dB)
Max
Working Voltage
600 V AC rms or DC 600 V AC 600 V AC rms or DC
Max
Conductor Diameter
610 mm or 914 mm,
depending on model
64 mm Flex-24 – 170 mm
Flex-36 – 275 mm
Output
Level(s)
100 mV/A
10 mV/A
1 mV/A
10 mv/A
1 mv/A
0.1 mv/A
50 mV/A
5mV/A
0.5mV/A
Output
Cable (m)
0.5 m 2.1 m 0.61 m i6000s Flex-24
0.91 m i6000s Flex-36
Power
Supply
2 x AA/MN 1500/LR6
Alkaline, 400 hours, low battery indicator or dedicated external
power supply
2 x AA MN 1500 LR6
alkaline, 400 Hours, low battery indicator or dedicated ext power
supply
Shrouded
Banana Plugs
BNC
Connector
BNC
to Bannana Adapter
Safety

BS EN 61010-1: 2001
BS EN 61010-2-032: 2002
BS EN 61010-031: 2002
600 V rms, Category III, Pollution Degree 2*
EMC standards   
EN 61326: 1998 +A1, A2, & A3
CAT III, 600 V

BS EN 61010    1:
2001
BS EN 61010    2-032: 2002
BS EN 61010    031: 2002
600V rms, Category III, Pollution Degree 2*  
EMC Standards   
BS EN 61326:     1998 +A1, A2, & A3

* Use of the probe on uninsulated conductors is limited to 600 V AC rms or dc and frequencies below 1 kHz.

No features available for this product

Please refer to the description for all available information about Fluke High Current Clamps.

Product Manual

We are very sorry but there is no manual for Fluke High Current Clamps available to download.

Product Datasheet

We apologise but there is no data sheet for Fluke High Current Clamps available to download.

Product Videos

We are very sorry but there are no videos of Fluke High Current Clamps available to view.