Fluke Low AC/DC Current Clamps

Fluke 80i-110s Current Clamp

The Fluke Low AC/DC Current Clamps provide ability of conducting both AC and DC currents measurement thus extending the functionality of your tester.

399.99739.99+ VAT

Please select Equipment Option to proceed...
Clear selection

Fluke Low AC/DC Current Clamps

80i-110s i30 i30s
Nominal
Current Range
10 A, AC/DC
100 A, AC/DC
30 mA to 30A dc
30 mA to 20 A ac rms
30 mA to 30 A DC
30 mA to 20 A AC rms
Continuous
AC Current Range
0.1 A – 10 A AC/DC
1 A – 100 A AC/DC
5 mA to 30 A dc
30 mA to 20 A ac rms
5 mA to 30 A DC
30 mA to 20 A AC rms
Highest
Current
140 A – 2 kHz 140 A – 2 kHz 30 A AC Peak
Lowest
Measurable Current
0.1 A 0.1 A 50 mA
Basic
Accuracy (48-65 Hz)*
± 3% + 50 mA (@ 10 A) ± 1 % of reading ± 2 mA ±1% of reading ±2 mA
Usable
Frequency
DC – 100 kHz DC to 20 kHz (- 0.5 dB) DC to 100 kHz (-0.5 dB)
Max
Working Voltage
600 V 300 V AC rms or DC 300 V AC rms or DC
Max
Conductor Diameter
11.8 mm 19 mm diameter 19 mm diameter
Output
Level(s)
100 mV/A
10 mV/A
100 mV/A

100 mV/A

Zero
error adjustment
Yes Manual adjust via thumbwheel Manual adjust via thumbwheel
Output
Cable (m)
1.6 m 1.5 m 2 m
Power
Supply
9 V battery, lasts for
55 h
9 V Alkaline,
MN1604/PP3, 30 hours, low battery indicator
9 V Alkaline,
MN1604/PP3, 30 hours, low battery indicator
Shrouded
Banana Plugs
BNC
Connector
BNC
to Bannana Adapter
Safety

CAT II, 600 V
CAT III, 300 V
BS EN 61010-1:2001
BS EN 61010-2-032:2002
BS EN 61010-031:2002
300 Vrms, Category III, Pollution Degree 2*
EMC Standards
EN 61326: 1998 +A1, A2, & A3
BS EN 61010-1: 2001
BS EN 61010-2-032: 2002
BS EN 61010-031: 2002
300 Vrms, Category III, Pollution Degree 2*
EMC standards
EN 61326: 1998 +A1, A2, and A3

* Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.

No features available for this product

Please refer to the description for all available information about Fluke Low AC/DC Current Clamps.

Product Manual

We are very sorry but there is no manual for Fluke Low AC/DC Current Clamps available to download.

Product Datasheet

We apologise but there is no data sheet for Fluke Low AC/DC Current Clamps available to download.

Product Videos

We are very sorry but there are no videos of Fluke Low AC/DC Current Clamps available to view.