Fluke i3000 FLEX 36 High Current Clamp

SKU: FLUKE I3000 FLEX-36 Categories: ,
Testers.ie Special Offer!
Fluke i3000 flex Current Clamp

The Fluke i3000 FLEX 36 High Current Clamp is designed to extend the capabilities of your tester. You can use your multimeter as an Amp meter without the need for separate Clamp Tester. Measure currents of up to 3500 A AC rms.

624.00excl VAT561.60excl VAT690.77incl VAT Free Delivery!

Description

Nominal Current Range30 A
300 A
3000 A
AC rms
Continuous AC Current Range1 A – 30 A
2 A – 300 A AC rms
30 A – 3000 A
Highest Current3500 A AC rms
Lowest Measurable Current1 A
Basic Accuracy (48-65 Hz)*± 1 % of range (45-65 Hz)
Usable Frequency10 Hz – 50 kHz (-3dB)
Max Working Voltage600 V AC rms or DC
Max Conductor Diameter610 mm or 914 mm, depending on model
Output Level(s)100 mV/A
10 mV/A
1 mV/A
Output Cable (m)0.5 m
Power Supply2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply
Shrouded Banana Plugs
BNC Connector
BNC to Bannana Adapter
SafetyBS EN 61010-1: 2001
BS EN 61010-2-032: 2002
BS EN 61010-031: 2002
600 V rms, Category III, Pollution Degree 2*
EMC standards
EN 61326: 1998 +A1, A2, & A3

* Use of the probe on uninsulated conductors is limited to 600 V AC rms or dc and frequencies below 1 kHz.

No features available for this product

Please refer to the description for all available information about Fluke i3000 FLEX 36 High Current Clamp.

Product Manual

We are very sorry but there is no manual for Fluke i3000 FLEX 36 High Current Clamp available to download.

Product Datasheet

We apologise but there is no data sheet for Fluke i3000 FLEX 36 High Current Clamp available to download.

Product Videos

We are very sorry but there are no videos of Fluke i3000 FLEX 36 High Current Clamp available to view.