Fluke i310S Low AC/DC Current Clamps

SKU: I310S Categories: ,
Fluke 80i-110s Current Clamp

The Fluke i310S Low AC/DC Current Clamp?provides the ability of conducting both AC and DC current measurements, thus extending the functionality of your tester.

471.00excl VAT579.33incl VAT Free Delivery!

Description

Nominal Current Range30 mA to 30 A DC
30 mA to 20 A AC rms
Continuous AC Current Range5 mA to 30 A DC
30 mA to 20 A AC rms
Highest Current30 A AC Peak
Lowest Measurable Current50 mA
Basic Accuracy (48-65 Hz)*?1% of reading ?2 mA
Usable FrequencyDC to 100 kHz (-0.5 dB)
Max Working Voltage300 V AC rms or DC
Max Conductor Diameter19 mm diameter
Output Level(s)100 mV/A
Zero Error AdjustmentManual Adjust via Thumbwheel
Output Cable (m)2 m
Power Supply9 V Alkaline,
MN1604/PP3, 30 hours, low battery indicator
Shrouded Banana Plugs
BNC Connector?
BNC to Bannana Adapter?
SafetyBS EN 61010-1: 2001
BS EN 61010-2-032: 2002
BS EN 61010-031: 2002
300 Vrms, Category III, Pollution Degree 2*
EMC standards
EN 61326: 1998 +A1, A2, and A3

* Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.

No features available for this product

Please refer to the description for all available information about Fluke i310S Low AC/DC Current Clamps.

Product Manual

If you'd like to download PDF manual for this product please click on the download button on the right. Please note that you would need PDF reader to open the file.

Product Datasheet

If you'd like to download PDF specification and data details for Fluke i310S Low AC/DC Current Clamps please use the download button on the right. Please note that you would need PDF reader to open the file.

Product Videos

We are very sorry but there are no videos of Fluke i310S Low AC/DC Current Clamps available to view.