The Fluke i5s AC Current Clamp?is rated either CAT III or 600V.
| Nominal Current Range | 5 A |
| Continuous AC Current Range | 0.01 A – 6 A |
| Highest Current | 70 A |
| Lowest Measurable Current | 10 mA |
| Basic Accuracy (48-65 Hz)* | 1% |
| Usable Frequency | 40 Hz to 5 kHz |
| Max Working Voltage | 600 V AC |
| Max Conductor Diameter | 15 mm |
| Output Level(s) | 400 mV/A |
| Output Cable (m) | 2.5 |
| Shrouded Banana Plugs | ? |
| BNC Connector | |
| BNC to Bannana Adapter | ? |
| Safety | CAT III, 600 V |
If you'd like to download PDF manual for this product please click on the download button on the right. Please note that you would need PDF reader to open the file.
We apologise but there is no data sheet for Fluke i5s AC Current Clamp available to download.
We are very sorry but there are no videos of Fluke i5s AC Current Clamp available to view.
The Fluke 772 milliamp clamp meter is efficient and cost effective; measuring output signals without breaking the loop or bringing down the system, and adds loop power.
The Fluke 381 Clamp Meter with detachable display is an extremely convenient device that is simple to use and very smart. Just install the clamp around conductor and set it up. Take the remote display with you and switch on the e
The Fluke 80i-110S Low AC/DC Current Clamp?provides the ability of conducting both AC and DC current measurements, thus extending the functionality of your tester.
The Fluke i310S Low AC/DC Current Clamp?provides the ability of conducting both AC and DC current measurements, thus extending the functionality of your tester.
