Fluke i6000 FLEX 36 High Current Clamp

SKU: 1483B Categories: ,
Fluke i3000 flex Current Clamp

The Fluke i6000 FLEX 36 High Current Clamp?is designed to extend the capabilities of your tester. You can use your multimeter as an Amp meter without the need for separate Clamp Tester. Measure currents of up to 6000 A.

€0.00excl VAT€0.00incl VAT

Description

Nominal Current Range60 A
600 A
6000 A AC rms
Continuous AC Current Range50 mV/A
5mV/A
0.5mV/A
Highest Current6000 A
Lowest Measurable Current1 A
Basic Accuracy (48-65 Hz)*?1% of range (45?65 Hz)
Usable Frequency10 Hz – 50 kHz (-3dB)
Max Working Voltage600 V AC rms or DC
Max Conductor DiameterFlex-24 – 170 mm
Flex-36 – 275 mm
Output Level(s)50 mV/A
5mV/A
0.5mV/A
Output Cable (m)0.61 m i6000s Flex-24
0.91 m i6000s Flex-36
Power Supply2 x AA MN 1500 LR6 alkaline, 400 Hours, low battery indicator or dedicated ext power supply
Shrouded Banana Plugs
BNC Connector
BNC to Bannana Adapter
SafetyBS EN 61010 1: 2001
BS EN 61010 2-032: 2002
BS EN 61010 031: 2002
600V rms, Category III, Pollution Degree 2*
EMC Standards
BS EN 61326: 1998 +A1, A2, & A3

* Use of the probe on uninsulated conductors is limited to 600 V AC rms or dc and frequencies below 1 kHz.

No features available for this product

Please refer to the description for all available information about Fluke i6000 FLEX 36 High Current Clamp.

Product Manual

We are very sorry but there is no manual for Fluke i6000 FLEX 36 High Current Clamp available to download.

Product Datasheet

We apologise but there is no data sheet for Fluke i6000 FLEX 36 High Current Clamp available to download.

Product Videos

We are very sorry but there are no videos of Fluke i6000 FLEX 36 High Current Clamp available to view.

Related products

  • Fluke i800 Current Clamp

    Fluke i800 Medium Current Clamp

    SKU: FLUKE I800

    The Fluke i800 Medium Current Clamp?is ideal for working on medium current conductors, measuring from 100 mA to 1500 A rms.

  • Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex?

    Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex?

    SKU: FLUKE 381

    The Fluke 381 Clamp Meter with detachable display is an extremely convenient device that is simple to use and very smart. Just install the clamp around conductor and set it up. Take the remote display with you and switch on the e

  • Fluke 323

    Fluke 323 True RMS Clamp Meter

    SKU: FLUKE 323

    Fluke 323 Digital Clamp Meter is a rugged, ergonomically built True RMS Clamp Meter capable of current measurements up to 400 A.

  • Fluke i3000 flex Current Clamp

    Fluke i6000 FLEX 24 High Current Clamp

    SKU: 1482B3

    The Fluke i6000 FLEX 24 High Current Clamp?is designed to extend the capabilities of your tester. You can use your multimeter as an Amp meter without the need for separate Clamp Tester. Measure currents of up to 6000 A.