Fluke i6000 FLEX 24 High Current Clamp

SKU: FLUKE I6000S FLEX-24 Categories: ,
Testers.ie Special Offer!
Fluke i3000 flex Current Clamp

The Fluke i6000 FLEX 24 High Current Clamp is designed to extend the capabilities of your tester. You can use your multimeter as an Amp meter without the need for separate Clamp Tester. Measure currents of up to 6000 A.

680.00excl VAT612.00excl VAT752.76incl VAT Free Delivery!

Description

Nominal Current Range60 A
600 A
6000 A AC rms
Continuous AC Current Range50 mV/A
5mV/A
0.5mV/A
Highest Current6000 A
Lowest Measurable Current1 A
Basic Accuracy (48-65 Hz)*±1% of range (45–65 Hz)
Usable Frequency10 Hz – 50 kHz (-3dB)
Max Working Voltage600 V AC rms or DC
Max Conductor DiameterFlex-24 – 170 mm
Flex-36 – 275 mm
Output Level(s)50 mV/A
5mV/A
0.5mV/A
Output Cable (m)0.61 m i6000s Flex-24
0.91 m i6000s Flex-36
Power Supply2 x AA MN 1500 LR6 alkaline, 400 Hours, low battery indicator or dedicated ext power supply
Shrouded Banana Plugs
BNC Connector
BNC to Bannana Adapter
SafetyBS EN 61010 1: 2001
BS EN 61010 2-032: 2002
BS EN 61010 031: 2002
600V rms, Category III, Pollution Degree 2*
EMC Standards
BS EN 61326: 1998 +A1, A2, & A3

* Use of the probe on uninsulated conductors is limited to 600 V AC rms or dc and frequencies below 1 kHz.

No features available for this product

Please refer to the description for all available information about Fluke i6000 FLEX 24 High Current Clamp.

Product Manual

We are very sorry but there is no manual for Fluke i6000 FLEX 24 High Current Clamp available to download.

Product Datasheet

We apologise but there is no data sheet for Fluke i6000 FLEX 24 High Current Clamp available to download.

Product Videos

We are very sorry but there are no videos of Fluke i6000 FLEX 24 High Current Clamp available to view.